LAMA – Mobile ICU nurse

Technical specification LAMA 1

✅MOBILOT structural system:

All-stainless steel tubes, stainless A2, wall thickness 1mm, 32mm cross-section,
equipped with end caps made of polymer*

Disc joints – modular connecting octagon – polymer* material, embedded stainless nuts

Wing screw-type connectors – stainless A2

Other stainless elements such as trays, hanging parts, etc., have no sharp edges.

Surface resistance to acetic acid (3% solution).

Cleaning is performed with persteril (3% solution)

Modular tubular totem structure. Height – 1.8 to 2.1m, footprint square 0.7x0.7m.
Other heights of auxiliary static structures, hangers, including totem stabilization
are adjustable. Each vertical pole individually. Totem is mobile on wheels with grounding option.

All assembly and structural components including fixture points for other equipment and devices are safe, easily mountable even with protective gloves.

✅Equipment and devices – part of the structure

*ATHEX 1 storage – oxygen – material – polymer, Al

Connection to the central distribution of medical gases. 1x input, 3x output.
The station and the storage unit meet requirements for water resistance IP min 54,
Dust IP min 54, impact IK x, explosive environments (volatile and gaseous substances, dust in case
of direct ignition threat, e.g. spark from electrical equipment) – solid enclosure “d”.

*ATHEX 2 storage – other equipment – material plastic, Al

Modular closed system unit for storing equipment, especially electrical.
Patented – CZ 308402 B6.

LV – 230V 8x + 2x reserve – socket plug, including breakers, 2 sockets per breaker.

Integrated microphone speaker, example MONACOR talksave.

Switch 8 x data connection, with VLAN support, POE, 48 volt, 802.3, AF/AT or higher
supports remote lighting control via POE data network

Wifi -2.46 / 5G with central management capability 802.11r/ CapsMan, virtual AP.

Connector (socket) for powering camera and lighting including remote control.

Driver for lighting control + connection to the device.

Cable for LV + data from central source. Storage connected via one RADIAL connector.
Length as specified. Cable end equipped with 230V and data terminal block.
Station and storage meet requirements for water resistance IP 54,
Dust IP 54, impact IK x.

✅Other equipment – Possibility of attachment or suspension on MOBILOT structure:

Local lighting, Hikvision camera capable of PTZ or 360 degrees Codec H. 265+
compatible with Hikvision IVMS 4200 software, Ateas security 514.

Mounting of medical equipment or tools such as Monitor, monitoring, ventilation, suction unit,
infusion hangers, storage for power components, cable fixation elements (Velcro straps,
plastic guiding braids, and others).
*Polymer / Polymax PTEG – EDS antistatic for El. devices. Material operating temperature 85°C. High resistance to UV in the wavelength 300–340 nm of UVA and UVB radiation
*AL / ENAC-47100 ENAC-AlSi12Cu1(Fe) (DieCasting)

✅The device complies with the legislative requirements of Act No. 22/1997 Coll. on technical requirements for products.

✅The device is compliant with ČSN 33 2000-7-710 – Low-voltage electrical installations – Part 7-710: Special installations or locations – Medical locations.

✅The device complies with the requirements of ČSN EN 61000-1-2 – Electromagnetic compatibility (EMC) – extended to standard ČSN EN 60601-1-2 ED.2 – Electromagnetic compatibility of medical devices.

Visual documentation and pricing available upon request.